- Shop
- >
- Spiral Pattern Shelters
- >
- Bungalow with Spiral Pattern
Bungalow with Spiral Pattern
Bungalow with spiral pattern
Shelter has one removable nesting blocks. Each block is a solid piece of mahogany with ten drilled out holes where a female bee will lay her eggs.
Material:
Solid wood frame with a reclaimed mahogany insert block from Taylor Guitars.
Copper colored roof and a brass nameplate.
Dimensions - 8.5" x 5.5" x 5.5"
A serial number is stamped on each shelter to be used for the bee map ID.
Directions:
Install your Bungalow in the garden where plants often bloom. Be sure the nesting tunnels face east, so the morning sun will warm the nest. Install between 2-5 feet off of the ground so the bees can easily fly from the pollen source to the nesting tunnel.
Maintenance:
After each use by a bee, the nesting tunnel must be cleaned. Simply remove the nest block from the frame and clean out the tunnel with a small file or bottle brush. If the debris is hard mud or resin you can also use a power drill with a long bit to scrap the tunnel walls clean. Shake out the debris so the tunnel is clean for another female bee.